Glazing Robot Lifter Car for Glass

• Warranty: 1year
• Type: Pneumatic Manipulator
• Certification: CE, ISO, UL
• Structure: Horizontal
• Control System: Point to Point Control
• Condition: New
• Model NO.: AG-CAR-700
• After-sales Service: 1year
• Safe Loading: 500kg
• Pneumatic Rotation: 90degree
• Pneumatic Tilting: 90degree
• Hoist Cylinder: 800mm/600mm
• Slewing Range: 180~270 Degree
• Cups: 4pads, 300mm Diameter
• Pads Description: Black Rubber, Abrasion Resistant, Long-Time Heat R
• Min Glass Size: 1100*1000mm
• Max Glass Size: 4000mm*2400mm
• Application: Welding, Load, Forging
• Drive Mode: Pneumatic
• Standard Operating Power: 24V DC
• Batter Charge: 220V 50/60Hz (Single Phase)
• Noise Level: Less Than 60 dB
• Vacuum Holding Time: More Than 20 Minutes After Power Loss
• Transport Package: Iron Frame & Shrink Film
• Specification: 1800*1400*1200mm
• Trademark: AGLASSTEC
• Origin: China
• HS Code: 84289090
• Production Capacity: 500 Sets/Month

Product Description

China Factory X-Type Battery Vacuum Lifter for Glass Suction Metals/Granite/Building Panels and Other Lifting Challenges with Good Price

Application:
1.Applicable for handling, lifting and installing glass curtain wall, glass partition, glass door and windows;
2.Applicable for handling, loading and uploading glass on trucks;
3.In addition, various kinds of marble, plastic plates, metal plates coated sheet and other sheet are applied;
4.The equipment is hanged with bridge cranes, portal cranes and jib cranes.



2. PRODUCT CHARATERISTICS
 

Code			AG-CAR-700
Safe Load Capacity			700kg
Number and Size of Pads			16,300 16pads/ [300mm]diameter
Pads Description			,,120 Silica gel, abrasion resistant, long-time heat resistant up to 120ºC
Product Weight			1500kg
Product size			3300mm(L)* 1250mm(W) * 2100mm(H)
Max.Glass Size			6000mm(L)*4000mm(W)*4-25mm(T)
Min. Glass Size			2200mm(L) *1200mm(W)*4-25mm(T)
Lifting Material			,,,, Glass, marble,plastic boards,metal sheet,coated boards and other plates.
Battery Specs.			200Ah *4
Working Power			24V DC
Batter Charge			220V/110V, 50/60HZ
Noise Level		Less than 80Db
Suitable for lifting		:/;: : ,,,, Material properties: Gastight/ non-porous, smooth surface Example: flat glass, building glass, various kinds of processing glass and special glass.
Performance		180°,. Hydraulic tilt 180°,upwards and downwards with stopping at any position. 360°,. Hydraulic motorized rotation 360°with stopping at any position. 90°,. Hydraulic head slew left & right 90°with stopping at any position. ,4000mm. Hydraulic lift up and down up to 4000mm. 1000mm. Hydraulic extend the lifting arm to 1000mm. Electric motor car, control by steering wheel 30%, Recharge when electricity power less than 30%
Safety protection		,;,. When vacuum reaches to the specified pressure,vacuum pump automatically stops to achieve energy saving; when vacuum pressure is insufficient,it automatically restarts to achieve vacuum compensation.

3. PRODUCT TECHNIQUE

Safety Loading Weight	700 kg
Factor of Safety	2.5
Standard Working Power	0.6~0.8 mpa
Noise Level	< 60 Db
Vacuum Holding time	More than 30 minutes after power loss
Gripping	Suction cups in vacuum state
Hoist Cylinder	100mm diameter; 1200mm distance; universal connection; three position five way valve make cylinder stay at any height with no drop, even if power loss
Rotation	Turn up to 90 degree driven by cylinder
Safety Protection	Vacuum non-return system and vacuum compensation system
Vacuum Compensation	when vacuum reaches to the specified pressure, it automatically closes the compressed air supply, to achieve energy saving; when vacuum pressure is insufficient, it automatically restore compressed air supply, to achieve vacuum compensation.
Control Method	Color-different buttons control on the same panel

4. SAFETY INSTRUCTION

Factor of safety	According to the European CE safety requirements for lifting equipment, and safety regulations on the German accident prevention regulations UVV 18 and VBG 9a, the best safety factor for vacuum lifter is 2.5. For example, each sucker 250mm dia., with suction reaching to 250kgf, divided by the safety factor 2.5, can load 100kg. If the lifter uses 4 suction cups, the total suction is 100*4=400kg, greater than approved glass 250kg. When the glass is handled and transported vertically, it should be multiplied by the coefficient of friction 0.8 (between rubber and glass), 400kg*0.8=320kg, still greater than the approved glass 250kg.
Safety Protection Instruction	Once glass sucked, the system is under airtight state. The only entrance for air is backflow from vacuum generator to destroy system's vacuum state. Therefore, the lifter is equipped with the safety non-return valve, for which air can only be extracted from inner system, with no return, and through which it can ensure sufficient vacuum to keep absorption time when power loss.
Vacuum Compensation Protection	Not worried about air leakage and insufficient vacuum, because the lifter is equipped with pressure sensor and vacuum compensation system. When vacuum is not enough, the system automatically senses and resumes operation to keep sufficient vacuum.

FAQ:

Q1: Are you a trading company or a manufactory?
A1: We are a manufactory, we supply the factory price with good quality, welcome to visit !

Q2: Why choosing AGLASSTEC ?
A2: Founder of the company  engaged in machinery manufacturing industry almost 20 years of experience, professional production and export of high-quality glass processing machinery,  industrial automation machinery, etc. , exported to all parts of the world, we have been committed to doing a good job of products, service every customer. 

Q3: Machine warranty specifications ?
A3: We will provide lifelong maintenance service in the use of machinery, we will solve
problems for customers free of charge, eliminate all the troubles of customers. For
machines beyond the warranty period, we will always provide follow-up services and
provide wearing parts for free, but we do not provide freight, local customs clearance fees
and related costs.

Q4: This is the first time I buy glass machine, is it easy to operate?
A4: We can provide the operation manual or video for guiding. If it is hard for you learning, We can help you by "Team viewer" online, with telephone or WhatsApp explain. And We will send our engineers to your factory to install the machines and train your staff how to operate the machines.

Q5: How to choose a suitable machine ?
A5: You can tell us working piece material, size, and the request of machine function. We can recommend the most suitable machine according to our experience.

Q6: How can I trust your company and your products ?
A6: The whole production procedure will be under regular inspection and strict quality
control. The complete machine will be tested to make sure they can work very well
before being out of factory. The testing video and pictures will be available before
delivery.

Q7: If machine have any problem after I ordered it, what could I do ?
A7: Free parts send to you in machine warranty period if machine have any problem. Free after-sales service life for machine, please feel free contact us if your machine have any problem. We will give you 24hours service from telphone and WhatsApp.

Q8: How about the spare parts?
A8: After we deal down all the things , we will offer you a spare parts list for your reference